TiO2–PANI/Cork composite: A new floating photocatalyst for the treatment of organic pollutants under sunlight irradiation

A novel photocatalyst based on TiO_2–PANI composite supported on small pieces of cork has been reported. It was prepared by simple impregnation method of the polyaniline(PANI)–modified TiO_2 on cork. The TiO_2–PANI/Cork catalyst shows the unique feature of floating on the water surface. The as-synthesized catalyst was characterized by X-ray diffraction(XRD),scanning electron micrograph(SEM), transmission electron microscopy(TEM), thermogravimetric analysis(TGA), Fourier transform infrared spectroscopy(FT-IR), UV–vis diffuse reflectance spectra(UV–vis DRS) and the Brunauer–Emmett–Teller(BET) surface area analysis. Characterization suggested the formation of anatase highly dispersed on the cork surface. The prepared floating photocatalyst showed high efficiency for the degradation of methyl orange dye and other organic pollutants under solar irradiation and constrained conditions, i.e., no-stirring and no-oxygenation. The TiO_2–PANI/Cork floating photocatalyst can be reused for at least four consecutive times without significant decrease of the degradation efficiency.     

Studies on the use of power ultrasound in solid–liquid myrobalan extraction process

Focus on eco-friendly processing techniques makes vegetable tanning a viable option in leather processing and establishes the subsequent need for the more efficient methods of extraction in tannin manufacture. Application of ultrasound has been tried in the extraction of tannins from myrobalan nuts in order to improve the extraction efficiency, to perform the extraction under milder process conditions and to reduce the process time. The influence of process parameters such as ultrasonic output power, time and temperature has been studied. Scale-up trials and the use of ultrasound in pulse mode have also been attempted. The results show that a three- to fivefold improvement is possible with ultrasonic output from 20 to 100 W. Extraction efficiency has been calculated from the maximum extractable materials from myrobalan nuts. Extraction efficiency is found to be 90% for ultrasound, 100 W without external heating as compared to 77% for control process at 70 °C for 4 h. Therefore, ultrasound could be employed even dispensing with provision for temperature controls. The use of ultrasound in pulse mode offered 70% extraction efficiency of continuous mode. Scale-up trials indicate that there exists an optimum ultrasonic output power depending on the amount of nuts used, to achieve better extraction efficiency. The effectiveness of ultrasonically extracted tannin solution has also been tested in the tanning process for its applicability. The degree of tanning efficacy has been assessed by shrinkage temperature measurement. The results indicate that ultrasonically extracted tannin solution is suitable for tanning process. Therefore, application of ultrasound in tannin extract manufacture is a viable option with added advantages.     

Biodegradation of mixture of VOC's in a biofilter

Volatile organic compounds(VOC‘s) in air have become major concern in recent years. Biodegradation of a mixture of ethanol and methanol vapor was evaluated in a laboratory biofilter with a bed of compost and polystyrene particles using an acclimated mixed culture. The continuous performance of the biofilter was studied with different proportion of ethanol and methanol at different initial concentration and flow rates. The result showed significant removal for both ethanol and methanol, which were composition dependent.The presence of either compound in the mixture inhibited the biodegradation of the other.     

A prototype of proposed treatment plant for sago factory effluent

Sago processing industries discharge wastewater, which poses a threat to water bodies due to their higher organic loading. Concerns about pollution related problems in the global scenario are persuading all the processing industries to adopt cleaner manufacturing practices. Hence, this study was aimed at developing a cost-effective and eco-friendly treatment plant based on microbial system to treat the sago factory effluent effectively in order to reuse the water for industrial purposes. The experimental results showed that, anaerobic treatment with mixed inoculum for 10 days followed by 6 days of fungal treatment was found to be effective in effluent treatment. The fusant showed a higher efficiency in the treatment of sago factory effluent than the parental strains.     

Growth and amylase production by Aspergillus oryzae during solid state fermentation using banana waste as substrate

Aspergillus oryzae, isolated from the starch rich litter soil, produced amylase when banana fruit stalk was used as substrate in a solid state fermentation system. The effects of incubation period, pH, temperature and various carbon sources on the production of amylase were studied. A maximum yield of 380U/mg was recorded on 96th hour of incubation. The amylase is tolerant to wide range of initial culture pH values (3 to 8) and temperature (25 to 35 degrees C), with an optimum pH of 5 and temperature of 35 degrees C. In SSF addition of starch (1%) increased the amylase production, when compared with other carbon sources used.     

Comparison of decolorization of reactive microorganisms isolated from various sources

Azo dyes are among the oldest man-made chemicals and they are still widely used in the textile, printing and the food industries.About 10% - 15% of the total dyes used in the industry is released into the environment during the manufacturing and usage. Some dyes and some of their N-substituted aromatic bio-transformation products are toxic and/or carcinogenic and therefore these dyes are considered to beenvironmental pollutants and health hazards. These azo dyes are degraded by physico-chemical and biological methods. Of these, biological methods are considered to be the most economical and efficient. In this work, attempts were made to degrade these dyes aerobically. Theorganisms which were efficient in degrading the following azo dyes-Red RB, Remazol Red, Remazol Blue, Remazol Violet, Remazol Yellow,Golden Yellow, Remazol Orange, Remazol Black- were isolated from three different sources viz., wastewater treatment plant, paper milleffluent treatment plant and tannery was tewater treatment plant. The efficiency of azo dye degradation by mixed cultures from each source wasanalyzed. It was found that mixed cultures from tannery treatment plant worked efficiently in decolorizing Remazol Red, Remazol Orange,Remazol Blue and Remazol Violet, while mixed cultures from the paper mill effluent worked efficiently in decolorizing Red RB, Golden Yellow and Remazol Yellow. The mixed cultures from wastewater treatment plant efficiently decolorized Remazol Black.     

Elevated nitrogen isotope ratios of tropical Indian aerosols from Chennai: Implication for the origins of aerosol nitrogen in South and Southeast Asia

To better understand the origins of aerosol nitrogen, we measured concentrations of total nitrogen (TN) and its isotope ratios (δ¹⁵N) in tropical Indian aerosols (PM₁₀) collected from Chennai (13.04°N; 80.17°E) on day- and night-time basis in winter and summer 2007. We found high δ¹⁵N values (+15.7 to +31.2‰) of aerosol N (0.3–3.8 μg m^?3), in which NH₄⁺ is the major species (78%) with lesser contribution from NO₃^? (6%). Based on the comparison of δ¹⁵N in Chennai aerosols with those reported for atmospheric aerosols from mid-latitudes and for the particles emitted from point sources (including a laboratory study), as well as the δ¹⁵N ratios of cow-dung samples (this study), we found that the atmospheric aerosol N in Chennai has two major sources; animal excreta and bio-fuel/biomass burning from South and Southeast Asia. We demonstrate that a gas-to-particle conversion of NH₃ to NH₄HSO₄ and (NH₄)₂SO₄ and the subsequent exchange reaction between NH₃ and NH₄⁺ are responsible for the isotopic enrichment of ¹⁵N in aerosol nitrogen.     

Washing of Marine Coastal Sand in a Batch Reactor: Sorption and Desorption of BTEX

ABSTRACT

This study addresses the issues related to decontamination of marine beach sand accidentally contaminated by petroleum products. Sorption and desorption of BTEX (i.e., benzene, toluene, ethylbenzene, and xylene) onto the sand from Uran Beach, located near the city of Mumbai, India, were studied, and isotherms were determined using the bottle point method to estimate sorption coefficients. Alternatively, QSARs (i.e., quantitative structure activity relationships) were developed and used to estimate the sorption coefficients. Experiments for kinetics of volatilization as well as for kinetics of sorption and desorption in the presence of volatilization were conducted in a fabricated laboratory batch reactor. A mathematical model describing the fate of volatile hydrophobic organic pollutants like BTEX (via sorption and desorption in presence of volatilization) in a batch sediment-washing reactor was proposed. The experimental kinetic data were compared with the values predicted using the proposed models for sorption and desorption, and the optimum values of overall mass transfer coefficients for sorption (K_sa_s) and desorption (K_da_d) were estimated.This was achieved by minimization of errors while using the sorption coefficients (K_p) obtained from either laboratory isotherm studies or the QSARs developed in the present study. Independent experimental data were also collected and used for calibration of the model for volatilization,and the values of the overall mass transfer coefficient for volatilization (K_ga_g) were estimated for BTEX. In these exercises of minimization of errors, comparable cumulative errors were obtained from the use of K_p values derived from experimental isotherms and QSARs.